P0016 on a Jeep: Causes, Fixes & Repair Cost
๐ Moderate severity ยท drivable
You can often drive a Jeep short distances with P0016, but if it runs rough, stalls, or won't start, stop driving โ a jumped timing chain can cause major engine damage.
What P0016 means on a Jeep
On a Jeep, P0016 means the crankshaft and camshaft position sensors on bank 1 are out of sync. Many Jeep engines use cam phasers and variable valve timing, so a correlation code usually points to a stretched timing chain, a worn cam phaser, or low oil pressure. A jumped chain can damage the engine.
Is P0016 common on Jeeps?
P0016 appears on Jeep models like the Grand Cherokee, Wrangler, and Cherokee, especially with higher mileage. Cam phasers and timing chains are common wear points, and dirty or low engine oil makes them fail faster.
Commonly reported on: Grand Cherokee, Wrangler, Cherokee.
Symptoms
- Check engine light on
- Rough idle or stalling
- Hard starting in some cases
- Loss of power or poor fuel economy
Common causes
- most common: Stretched or jumped timing chain
- common: Worn cam phaser
- common: Low oil pressure
- less common: Faulty camshaft position sensor
- less common: Worn chain guide or tensioner
How to fix it
| Fix | DIY? | Typical cost |
|---|---|---|
| Check the oil level and pressure | Yes | $30โ80 |
| Replace the timing chain kit if it is stretched | Mechanic | $1200โ2500 |
| Replace a worn cam phaser | Mechanic | $400โ900 |
| Replace a faulty camshaft position sensor | Yes | $100โ250 |
Frequently asked questions
Other common Jeep codes
P0016 on other brands
Looking for the full (non-brand-specific) guide? See the P0016 code page โ
Browse all Jeep codes: Jeep hub โ
Updated 2026-08. This page is informational and not a substitute for professional diagnosis.