P0360 Code: Ignition Coil J Primary Circuit Malfunction
🟠 Moderate severity · drivable
Drivable, but that cylinder will misfire. Stop and get a tow if the check engine light is flashing.
What P0360 means
There's an electrical fault in the primary circuit of ignition coil J. On many engines, coil J feeds cylinder 10. That cylinder won't get proper spark, so it will misfire.
Symptoms
- Check engine light on (may flash)
- Misfire from cylinder 10
- Rough idle
- Loss of power
- Poor fuel economy
Common causes
- most common: Faulty ignition coil
- common: Damaged wiring or loose connector at the coil
- less common: Failed ignition driver in the engine computer
How to fix it
| Fix | DIY? | Typical cost |
|---|---|---|
| Replace ignition coil J | Yes | $50–200 |
| Repair damaged coil wiring | Mechanic | $50–150 |
| Swap coil J with another cylinder's coil to confirm the fault | Yes | $0–20 |
Frequently asked questions
Can I drive with a P0360 code?
Yes if the light is steady, but the engine will misfire. Stop and get a tow if the light is flashing.
What is the most common cause of P0360?
A faulty ignition coil J, which feeds cylinder 10 on many engines.
How much does it cost to fix a P0360?
Typically $50–$200 for a new ignition coil.
Related codes
P0310
P0310 Code: Cylinder 10 Misfire Detected
P0359P0359 Code: Ignition Coil I Primary Circuit Malfunction
P0361P0361 Code: Ignition Coil K Primary Circuit Malfunction
Updated 2026-08. This page is informational and not a substitute for professional diagnosis.