P0340 on a Nissan: Causes, Fixes & Repair Cost

⚠️ Severe · not recommended to drive

The engine may not start, or it may stall while driving, so have the car towed if it won't start.

What P0340 means on a Nissan

On a Nissan, P0340 means the engine computer is getting no signal or a bad signal from the camshaft position sensor. Without camshaft position, the computer can't time fuel injection correctly, and the engine may refuse to start or may stall.

Is P0340 common on Nissans?

P0340 is well known on Nissans with the 2.5L four-cylinder engine, most often in Altima, Rogue, and Sentra models. The camshaft position sensor fails with age and mileage, and the sensor is mounted so it can be checked and replaced fairly easily on many of these engines.

Commonly reported on: Altima, Rogue, Sentra, Frontier.

Symptoms

Check engine light is on
Engine cranks but won't start
Engine stalls while driving
Rough running or loss of power

Common causes

most common: Failed camshaft position sensor
common: Damaged wiring or connector at the sensor
common: Oil contamination on the sensor
less common: Timing chain or timing issues

How to fix it

Fix	DIY?	Typical cost
Replace the camshaft position sensor	Yes	$40–120
Repair damaged sensor wiring or connector	Mechanic	$100–250
Have a mechanic check the timing chain and guides	Mechanic	$900–1600